MCA 100 BIO Portable MULTICOMPONENT ANALYZER FOR BIOGAS

 


MCA 100 BIO Portable MULTICOMPONENT ANALYZER FOR BIOGAS

Features

  • Battery : 12 Vcc with Internal Charger and light charge indicator
  • Monitor : Touch Screen 5.7” Resistive type
  • Calibration : Zero & span user selectable. Automatic calibration ( optional)
  • External Electrical supply : from 100 to 240 Vac 47-63 Hz
  • Pneumatic connection : Rapid fittings 6.0 OD 4.0 ID
  • Mechanical dimensions : 43 x 24.4 x 34.1 cm (16.93" x 9.61" x 13.42")
  • Weight : 3.5 kG

 

Overview

Overview

  • Analysis of CO2, CH4, O2, H2S
  • NDIR technology for CO2 and CH4
  • Automatic air purge for long life H2S cell
  • Arm Processor
  • Touch Screen monitor
  • Ethernet, Wi-fi and USB Remonting
  • Low cost ownership
  • Portable version with battery pack
  • Modbus, Profibus, Ethernet ( optional )
  • Autozero
  • Data downloadable on USB Pen Drive

The MCA 100 Bio series of gas analyzers by ETG it’s the ideal solution for biogas measurement and industrial combustion applications because of their accuracy, stability, reliability, broad measurement range, and the variety of available form factors. Unlike other analyzers, ETG MCA 100 non-dispersive infrared (NDIR) gas analyzers measure multiple gases in an instrument with a single optical path platform.

Single-gas analyzers are inadequate when using methane as a biofuel because the gas often contains large amounts of CO as a contaminant. ETG analyzers have the ability to measure CO2, CO, and O2 in addition to methane and therefore provide the optimal combination of gases for combustion optimization.

The enhanced optics and electronics of our NDIR analyzers have virtually eliminated zero drift after the initial warm up period. The temperature and pressure compensation eliminates the major causes of span drift in many NDIR instruments.

 

MCA 100 BIO Portable MULTICOMPONENT ANALYZER FOR BIOGAS

MCA 100 BIO Portable MULTICOMPONENT ANALYZER FOR BIOGAS

 

Bargraph and digital value

MCA 100 BIO Portable MULTICOMPONENT ANALYZER FOR BIOGAS

Trend and digital value

MCA 100 BIO Portable MULTICOMPONENT ANALYZER FOR BIOGAS

MCA 100 BIO Portable MULTICOMPONENT ANALYZER FOR BIOGAS

All the ETG MCA 100 and 6500 series
for Biogas have Remote Support and
Remote Access

  • File transfer
  • Data monitoring by your PC , tablet and smartphone
  • Software update

·

SPECIFICATIONS

Response Time : Response times are specified at a sample flow rate of a 1 liter per minute through the MCA 100 sample cell
Data Refresh Rate : 1 second
Warm-up Time : 30 seconds ready,3 minutes useable,30 minutes to full performance
Operating Temperature : 0° to 70° C ( 32° to 158° F)
Operating Humidity : To 95% RH ( Non-condensing)
Operating Altitude : -300 to 3.000 m ( -1.000 to 10.000 ft )
Communications : USB port ( standard )
Case Protection : IP67(1 meter submersion for 30 minutes) • Def Stan 81-41/STANAG 4280MCA 100 BIO Portable MULTICOMPONENT ANALYZER FOR BIOGAS